Raumer Stainless Steel Anchor Superstar Ø10x80 Stainless Steel Ring And Carabiner
This excellent stainless steel resin anchor is used to create abseiling or top-rope anchors.
The carabiner allows the rope to be easily threaded into the anchor and facilitates rope retrieval from below. The carabiner is clipped into a 10mm-diameter ring which allows it to hang perpendicular to the face, thus allowing the rope to function well whatever the directional force. The first ring can also be used as an anchor when the stance is being used by more than one person.
For obvious safety reasons, always use two anchors. During use, the live rope must pass through both carabiners.
Composed by: one Superstar Ø10x80 (art. 160), one round ring (art. 177) and one carabiner inox R5000 (art. 600)
Description
Specification as follows:
- Now created exclusively in AISI 316L Stainless Steel (from 2013 onwards) It is corrosion-resistant in almost all environments and inland use is guaranteed for at least 10 years. The “MARINA” versions are specifically designed to withstand harsh marine environments.
- The shank is knurled, with a cross-hatch covering 50mm. This method of resin fixing has long been the most reliable and resistant, particularly when compared with resin anchors with transversal grooves or horizontal dimpled surfaces which are notoriously unreliable and dangerous.
- The carabiner allows the rope to be quickly clipped through the system for a top-rope lower-off.
- This carabiner is very resistant to wear as the stainless steel ring is 12mm thick. In the event of damage it can be replaced using a large pair of pliers. The carabiner is equipped with a bar which prevents it from twisting.
- Like all our climbing anchor systems, the surface is matt grey to minimise environmental and visual impact.
Spécifications
- Matière: Acier Inox AISI 316 L
- Made in Italy
- Depuis le dèbut de l'annee 2013, la plupart de nos produits sont fabriqué en acier inoxydable AISI 316L. Par rapport à l'acier précédente AISI 304, celui-là, le 316L, est indiscutablement beaucoup plus résistant à la corrosion marine. Afin de bien remarquer cette différence, y sera systématiquement présent sur chaque produit le sigle de la qualité d'acier correspondante.
- Il est également disponible en version “Marina”. Cette acier est encore plus résistant à la corrosion et à la salinité: son logo est symbolisé par un poisson stylisé avec l'écriture “Inox” sur l'intérieur.
- Nous vous suggérons de lire à ce sujet le document pdf ci-joint ou sont bien expliqué tous les problèmes sur la corrosion marine.
Certifications
See all the informations on the page of the art. 160 and 600
- Compliance certificate EN 959:2007 – Rock Anchors
- Compliance certificate UNI 11578:2015 – Devices type A
- UIAA 123 - 2
Riferimenti
- Weight: 420 gr
- Dimensions of the shank: 10x80 mm
- Static Shear Strenght: 30 KN
- Extraction Static Strenght: 30 KN
- Usable by 1 person at a time
- Warranty: 3 years
- Marine Version: Art. 225M
Technical Informations .pdf
Please, read, understand and retain the following documents with the device:
- General Informations
- Technical Data Sheet
- Inspection Sheet
- Certificate of conformity
- Standards about Raumer Products
- Stainless Steels and their corrosion
Δεν βρέθηκαν δημοσιεύσεις
