Protekt Rup 504 Electric Rope Winch 1 Phase 230V AC
A 230V AC 1-phase electric-powered winch fitted with a steel line of the diameter of 6mm and the length of 30m wound onto a drum.
The device is designed for cargo lifting.Working load limit (WLL) for lifting cargo:500 kg.
If an additional TU415 / TU416 pulley is used, the working load limit for lifting cargo (WLL) can be increased to 1000kg.
The device can be used to lift, lower and to evacuate personnel when an additional WR / CR / CRW series fall arrest device is used.
Working load limit (WLL) for lifting/lowering personnel:200kg.
230V 1-phase alternating current power supply.The kit includes a cable for connection to the mains with an EU plug.
Operating speed:7m/min (using the TU415/TU416 pulley - 3.5m/min).
Load cycle: 30% (18min/hour – 2h/day).
Number of switch-on times per hour: 180
IP protection: IP54.
Power: 1300W
The device is fitted with a connecting plate (RUP506-000-001) as well as a UTB connector (AT017-330).
Technical specification
Weight: 21 kg
Dimensions: 490 x 170 x 180 mm
DOR (permissible operating load): 500 kg
Minimum breaking load MBS: 21 kN
Safety Factor: 2.1
Working speed: 7 m/min
Material
Construction: steel
Cover: steel
Mechanism: steel
Manufacture
Construction: powder coating
Cover: powder coating
Rope
Rope diameters ø: 6 mm
Length: 30 m
Material: galvanized steel
Manufacture: kernmantle rope
Power supply
Power supply type: single-phase, networked
Control
Type of control: wired remote control
Length of the pilot control cable: 2 m
